Owners of Dillon reloading equipment expect high quality and superior performance. We designed our UFO line of reloading press lights with this in mind.
The UFO 650 is, in our opinion the best possible design to put light right where you need it, on the shell stations. This allows you to visually verify powder levels before you set the bullet. No more relying on battery powered flashlights or lights that mostly illuminate the shell plate bolt. You only need one light per press, not one for each tool head!
** As pictured; this is for the UFO 650 Light strip only. Requires 1Amp 12v power supply and switch with a 2.1mmX5.5mm male plug. **
Once installed, you will be amazed at the amount of light produced by the LEDs. The location of the LEDs ensure that there are no shadows and that you have an unobstructed view of the work area of your press.
This design also
ensures that the light strip and the associated wiring
does not obstruct your ability to use your press.
Safety is the number one priority for reloaders.
Attention to detail is critical to ensure
that your reloaded ammunition is loaded to the
proper specifications. One of the most dangerous
mistakes a reloader can make is a double charge of
powder or a squib where a case gets no powder.
Either of these can result in an explosion and injury or even death.
Using the UFO 650 you will have one more tool that will help you spot a problem and correct them before it leads to tragedy.
The Difference is Clear
The first time you switch on your UFO 650, you
will wonder how you ever reloaded without it.
The UFO 650 out performs all similar products and sets the standard which all other lights are measured.
We truly believe once you have used a UFO series light you will wonder how you ever reloaded without one.
High Quality Adhesive
The UFO 650 includes 3M 300LSE adhesive. This is specifically designed for applications where the surface is textured as is found on the Dillon XL650.
If the surface is clean, it will stick and it will stay put!
The UFO 650 was custom designed to attach to the underside of the tool head support. This innovative design provides overhead
lighting in a compact form factor.
With the UFO 650 you need only one for each press rather than one for each tool head as with other competing products.
Wiring exits to the rear of the press ensuring that it stays out of the way.
24 Extremely Bright LEDs (500 Lumens)
Zip Ties, Cable Mounts
Not Inc. w/ Exp Pack:12v 1A DC Power Supply,
Your UFO 650 will arrive in a secure clam shell package to prevent damage from shipping. It also includes high quality instructions to ensure that your installation goes smoothly.